|
|
| Line 1: |
Line 1: |
| − | <font face='Courier New'>
| + | #redirect [[Get Current ENTD Data Pointer]] |
| − |
| |
| − | 00042880: 27bdffe8 addiu r29,r29,0xffe8
| |
| − | 00042884: afb00010 sw r16,0x0010(r29)
| |
| − | 00042888: 3c108004 lui r16,0x8004
| |
| − | 0004288c: 26107600 addiu r16,r16,0x7600 # 0x80047600 = Seems to be where the current ENTD ID is stored
| |
| − | 00042890: afbf0014 sw r31,0x0014(r29)
| |
| − | 00042894: 8e020000 lw r2,0x0000(r16) # r2 = Current ENTD ID
| |
| − | 00042898: 00000000 nop
| |
| − | 0004289c: 1040001f beq r2,r0,0x0004291c # Branch to end if ENTD ID = 0
| |
| − | 000428a0: 2402ffff addiu r2,r0,0xffff # r2 = 0xffff (some kind of value to indicate there is no ENTD?)
| |
| − | 000428a4: 0c0111b2 jal 0x000446c8 # [[Check File Still Loading]]
| |
| − | 000428a8: 00000000 nop
| |
| − | 000428ac: 1440001b bne r2,r0,0x0004291c # Branch to end if there was a value (presumably meaning not loaded yet?)
| |
| − | 000428b0: 00001021 addu r2,r0,r0 # r2 = 0 (some kind of value to indicate failure to load?)
| |
| − | 000428b4: 8e030000 lw r3,0x0000(r16) # r3 = Current ENTD ID
| |
| − | 000428b8: 00000000 nop
| |
| − | 000428bc: 28620080 slti r2,r3,0x0080 # r2 = 0x01 if ENTD ID is less than 0x80 (using ENTD 1)
| |
| − | 000428c0: 10400007 beq r2,r0,0x000428e0 # Branch if above 0x80
| |
| − | 000428c4: 00031080 sll r2,r3,0x02 # r2 = ENTD ID * 4
| |
| − | 000428c8: 00431021 addu r2,r2,r3 # -- r2 = ENTD ID * 5
| |
| − | 000428cc: 3c038004 lui r3,0x8004
| |
| − | 000428d0: 8c637604 lw r3,0x7604(r3) # -- r3 = Load from 0x80047604. Seems to be the pointer to the start of the current ENTD sector's data
| |
| − | 000428d4: 000211c0 sll r2,r2,0x07 # -- r2 = ENTD ID * 0x280
| |
| − | 000428d8: 08010a47 j 0x0004291c # -- Jump to end
| |
| − | 000428dc: 00431021 addu r2,r2,r3 # -- r2 = ENTD encounter tables + ENTD ID * 0x280 = Current ENTD's data
| |
| − | 000428e0: 28620100 slti r2,r3,0x0100 # r2 = 0x01 if ENTD ID is less than 0x100 (using ENTD 2)
| |
| − | 000428e4: 14400007 bne r2,r0,0x00042904 # Branch if ENTD ID is 0x80-0xFF (ENTD 2)
| |
| − | 000428e8: 2462ff80 addiu r2,r3,0xff80 # r2 = ENTD ID - 0x80
| |
| − | 000428ec: 28620180 slti r2,r3,0x0180 # -- r2 = 0x01 if ENTD ID is 0x101-0x17F (using ENTD 3)
| |
| − | 000428f0: 10400003 beq r2,r0,0x00042900 # -- Branch if ENTD ID is 0x180-0x1FF (using ENTD 4)
| |
| − | 000428f4: 00000000 nop
| |
| − | 000428f8: 08010a41 j 0x00042904 # -- --
| |
| − | 000428fc: 2462ff00 addiu r2,r3,0xff00 # -- -- r2 = ENTD ID - 0x100
| |
| − | 00042900: 2462fe80 addiu r2,r3,0xfe80 # -- r2 = ENTD ID - 0x180
| |
| − | 00042904: 00021880 sll r3,r2,0x02 # r3 = modified ENTD ID * 4
| |
| − | 00042908: 00621821 addu r3,r3,r2 # r3 = modified ENTD ID * 5
| |
| − | 0004290c: 3c028004 lui r2,0x8004
| |
| − | 00042910: 8c427604 lw r2,0x7604(r2) # r2 = Current ENTD sector data pointer
| |
| − | 00042914: 000319c0 sll r3,r3,0x07 # r3 = modified ENTD ID * 0x280
| |
| − | 00042918: 00621021 addu r2,r3,r2 # r2 = Current ENTD data pointer
| |
| − | 0004291c: 8fbf0014 lw r31,0x0014(r29)
| |
| − | 00042920: 8fb00010 lw r16,0x0010(r29)
| |
| − | 00042924: 27bd0018 addiu r29,r29,0x0018
| |
| − | 00042928: 03e00008 jr r31
| |
| − | 0004292c: 00000000 nop
| |
| − | </font>
| |
