JOBSTTS.OUT Load Image & Wait

#       Parameters:
#           r4 = RECT *recp (points to destination rectangular area to load image into)
#           r5 = u_long *p (points to source of transmission)
# parameters go directly into LoadImage.

001e1ff0: 27bdffe8 addiu r29,r29,0xffe8
001e1ff4: afbf0010 sw r31,0x0010(r29)
001e1ff8: 0c00923f jal 0x000248fc            SYS LoadImage
001e1ffc: 00000000 nop
001e2000: 0c0091b5 jal 0x000246d4            SYS DrawSync(0x1)
001e2004: 34040001 ori r4,r0,0x0001
001e2008: 1440fffd bne r2,r0,0x001e2000      loop if there are still things to draw in queue.
001e200c: 00000000 nop
001e2010: 8fbf0010 lw r31,0x0010(r29)
001e2014: 27bd0018 addiu r29,r29,0x0018
001e2018: 03e00008 jr r31
001e201c: 00000000 nop