Difference between revisions of "Focus"
m (Xifanie moved page Event Instruction 1F to Focus) |
|
(No difference)
|
Latest revision as of 14:55, 6 August 2020
Contents
{1F} Focus
Focus(xID,x00,xID,x00,x00)
The next Camera instruction will automatically center between Unit 1 and Unit 2. If the two are the same unit, it focuses on that single unit.
Requires {19} Camera placed after this instruction (or after {38} FocusSpeed).
You can set the Travel Speed of the Camera instruction using {38} FocusSpeed.
The settings in red are overridden by the Focus command:
Camera(+XXXXX,+ZZZZZ,+YYYYY,+ANGLE,+MAPRT,+CAMRT,+ZOOM%,+TIMER)
See Also: {19} Camera ― {38} FocusSpeed
Unit 1 ID : Byte (hex)
ID of the unit specified in the ENTD.
x00 : Byte (hex)
This value is always set to x00 in the original game; it probably doesn't have a function.
Unit 2 ID : Byte (hex)
ID of the unit specified in the ENTD.
x00 : Byte (hex)
This value is always set to x00 in the original game; it probably doesn't have a function.
Unknown : Byte (hex)
Almost always x00; sometimes x01.