Focus

{1F} Focus

Focus(xID,x00,xID,x00,x00)

The next Camera instruction will automatically center between Unit 1 and Unit 2. If the two are the same unit, it focuses on that single unit.

Requires {19} Camera placed after this instruction (or after {38} FocusSpeed).

You can set the Travel Speed of the Camera instruction using {38} FocusSpeed.

The settings in red are overridden by the Focus command:

Camera(+XXXXX,+ZZZZZ,+YYYYY,+ANGLE,+MAPRT,+CAMRT,+ZOOM%,+TIMER)

See Also: {19} Camera ― {38} FocusSpeed

Unit 1 ID : Byte (hex)

ID of the unit specified in the ENTD.

x00 : Byte (hex)

This value is always set to x00 in the original game; it probably doesn't have a function.

Unit 2 ID : Byte (hex)

ID of the unit specified in the ENTD.

x00 : Byte (hex)

This value is always set to x00 in the original game; it probably doesn't have a function.

Unknown : Byte (hex)

Almost always x00; sometimes x01.